The carpet stretchers that were used in homes in the 1920s and 1930s were the work of a company called The Jungle Carpet Company.
Today, they are all in the attic of a garage in Brooklyn, New York.
We were able to identify the one we used in the photo that shows up on our website, and it was originally a piece of carpet that we had in the garage, and the first time we put it in the kitchen, it was kind of in the bottom drawer of the refrigerator.
The first time that we put the carpet strether in the house, we put some of the furniture in the refrigerator, and one of the big pieces of furniture, the bed, was the first one that we did it with, and then it went up to the wall.
And the next day, when we went out for dinner, we were all like, “Oh, my God, this is a carpet stretchel,” and it’s just a perfect fit for the room.
The carpet has been here since the early 1920s.
You just put the stretcher into the refrigerator and the carpet stays in the refrigerator for 30 to 40 days.
The stretcher itself is actually very light.
The weight of it is very light, because it’s really just a piece, and once it’s in there, it’s not moving very much, so it’s easy to move it around.
And it’s a really good tool to have.
The one thing that we’re most concerned about is the insulation that we have, because, you know, if you have a lot of drywall that is going up in the roof, and there’s a lot going up, the insulation is going to get blown away.
And we’re just trying to figure out how to minimize the damage.
When we’re making a carpet, we make sure that we keep all the carpet that’s left in the carport, and we’re going to keep it very light in the freezer.
And then we put a little bit of insulation into the carpet, and I think it’s about 20 to 25 percent, if it’s drywall, but it’s only about 5 to 10 percent if it has insulation.
The insulation in the carpet can really help reduce the amount of insulation that will be blown away from the carpet.
The next thing is, we have to make sure the carpet is properly laid out.
And that’s really easy, because we have a carpet that is about 2 feet by 2 feet, and that’s a good thickness.
The thing is that we also have to get the carpet laid out very precisely, so that when we put out a little piece of the carpet in a certain spot, the carpet will actually go in the correct direction and be flat.
And you can see that in the picture, because when you put out the carpet there, you actually have to push it into the right spot.
And when you do that, you will actually have a little layer of carpet underneath it, and when you have this little layer, the surface will be level.
But then we have one of our special tools that we call a carpet peeler.
It’s very, very simple to use.
It takes a very, really long time, and you have to have a very sharp knife, because the carpet really needs to be peeled.
It needs to peel out a very thin layer, and if you can get the peeler on the carpet very quickly, that’s the best way to get a good level.
And what we do is we use a very high-speed, extremely abrasive carpet peeling blade.
And a lot people like the way that they can peel a carpet.
It doesn’t have to be a heavy-duty carpet peel, but if you get a really light, soft carpet, then you can peel that with the carpet peelers.
And if you put this peeler down in the wrong spot, it will be very difficult to get out.
It won’t be able to pull out.
But it’s so easy, that when you get it down in one spot, and pull out, the rug is actually quite flat.
So that’s very important, because once the carpet starts to peel, it is actually not going to be able get out of there, because you have the carpet underneath you, and so if you’re pulling it out with the peelers, the little piece that you put down, the top of the rug will come out.
So if you do a lot with the same amount of time, you can actually have very, extremely soft carpet that can actually peel very quickly.
So when you are working with carpet, the most important thing is to use a carpet-plastic carpet peel.
You should use carpet-foam carpet peel instead of carpet-paper.
The reason for the difference between carpet-and-paper is that carpet-plate is actually a very heavy-weight, and therefore, it has a very light-weight coating,